lab05 : More Loops - Accumulator Pattern, Updating Lists, and Filtering Lists

num ready? description assigned due
lab05 true More Loops - Accumulator Pattern, Updating Lists, and Filtering Lists Wed 02/13 09:00AM Tue 02/19 11:59PM

In this lab, you’ll get more practice with:

This lab may be done solo, or in pairs.

Before you begin working on the lab, please decide if you will work solo or with a partner.

A reminder about working with a pair programming partner:

Once you and your partner are in agreement, choose an initial driver and navigator, and have the driver log into their account.

Instructions

In this lab, you will need to create two files:

Starter code is provided for you and are located at (you may need to refresh the page if the links do not load immediately):

You will complete the portions in the starter code by doing the following:

  1. Create a directory called ~/cs8/lab05 (using the mkdir command) and cd into that directory.
  2. Use idle3 (you might try idle3 & if you want to be able to type commands on your terminal window after IDLE opens).
  3. Use “New File” to create empty files called lab05.py and lab05_tests.py in that ~/cs8/lab05 directory.
  4. ONE AT A TIME, copy the function definitions from the starter code, and the tests that go along with those functions, and get the tests to pass.
    • By one a a time, what I mean is, at your first step, copy ONLY the first function definition from the starter code lab05.py and copy only the import statements and test cases from lab05_tests.py that go with that function definition.
    • Then, before you move on to the next function definition and its tests, get all of the tests from the one you just copied to pass.
    • Then, and only then, copy the next function definition and its tests into your files.
    • Repeat this until you have ALL of the function definitions and their tests, and all of them pass.

You are encouraged to try submitting to Gradescope periodically for several reasons:

Upload lab05.py and lab05_tests.py to Gradescope.

Once you’re done with writing your functions, navigate to the Lab assignment “Lab05” on Gradescope and upload your lab05.py and lab05_tests.py files. Remember to add your partner to Groups Members for this submission on Gradescope if applicable. At this point, if you worked in a pair, it is a good idea for both partners to log into Gradescope and see if you can see the uploaded files for lab05.